Integrated Energy Storage
209kWh battery capacity at 665.6V rated voltage.
G3 Mobile EV Charger with 209kWh Energy Storage
G3
A mobile battery-powered DC charging unit with 209kWh onboard energy storage and up to 150kW CCS2 output. Bring charging capacity to parking areas, fleet sites and locations where fixed charging infrastructure is limited.
209kWhEnergy storage150kWPeak DC outputCCS2Charging connector
Mobile EV charging
Mobile Charging Capacity Where It Is Needed
A mobile battery-powered DC charging unit with 209kWh onboard energy storage and up to 150kW CCS2 output. Bring charging capacity to parking areas, fleet sites and locations where fixed charging infrastructure is limited.
Recharge the onboard battery from a compatible AC or DC supply, then use the CCS2 output to charge a supported electric vehicle. The integrated battery and wheeled cabinet support flexible deployment at parking facilities, service areas and commercial fleet locations.
DC Fast Charging
Up to 150kW, with a 200–1000V output range and 250A output current limit.
Flexible Recharging
Three-phase AC input up to 30kW or compatible DC input up to 105kW.
Connected Operation
4G, Wi-Fi, OCPP 1.6 and OTA updates; OCPP 2.0.1 upgrade capability is stated in the brochure.
System integration
Integrated Storage & DC Charging
A mobile charging platform combining onboard energy storage, EV output and recharge inputs.
Storage & Charging in One Mobile Unit
G3 · CCS2Integrated battery, charging electronics, display and mobile cabinet with one 5m CCS2 output cable.EV Compatibility
CCS2 vehicle interface
Recharge Supply
Compatible AC or DC source
Connected Service
4G · Wi-Fi · OCPP
View Equipment Scope +
- Energy storage · 209kWh
- 665.6V rated battery voltage.
- EV charging output · 1 × CCS2
- One 5m cable; peak output 150kW.
- AC recharge input · Up to 30kW
- Three-phase 400Vac; brochure input frequency 60Hz.
- DC recharge input · Up to 105kW
- Maximum input voltage 759Vdc; supply compatibility must be confirmed.
- Interface and connectivity · 7-inch display
- QR-code payment mode, 4G, Wi-Fi and OCPP integration.
Technical specifications
G3 CCS2 Charger Specifications
Parameters from the supplied CCS2 brochure. Match vehicle and recharge supply requirements to the selected configuration.
- Energy storage capacity
- 209kWh
- Rated battery voltage
- 665.6V
- Output interface
- CCS2
- Peak output power
- 150kW
- Output voltage
- 200–1000Vdc
- Output current
- 250A
- Output configuration
- 1 × CCS2, 5m cable
- Charging performance
- Actual output depends on vehicle voltage, current acceptance, battery state and operating conditions.
- AC supply
- Three-phase 400Vac
- Maximum AC input power
- 30kW
- Maximum DC input voltage
- 759Vdc
- Maximum DC input power
- 105kW
- Input socket description
- DC–AC integrated CCS2 power supply socket, as stated in the brochure
- Input frequency
- 60Hz, as specified in the supplied brochure
- Site matching
- Confirm supply voltage, frequency and connector compatibility for the destination site.
- Battery pack protection
- IP67
- Charging unit protection
- IP55
- Operating altitude
- ≤2000m
- Working temperature
- −20°C to +40°C
- Storage temperature
- −30°C to +60°C
- Cabinet dimensions
- 2270 × 990 × 1380mm
- Display
- 7 inches
- Payment mode
- QR-code scanning
- Wireless connectivity
- 4G / Wi-Fi
- Communication protocol
- OCPP 1.6
- Protocol upgrade
- OCPP 2.0.1 upgrade capability stated in brochure
- System update
- OTA online update
- Standards listed in parameter table
- IEC 62619 / IEC 61851
- Documentation note
- Project-specific certification documents and software compatibility should be confirmed for the selected configuration.
Product resources
G3 CCS2 Product Brochure
Optimized 4-page brochure with product features, applications and the complete parameter table.
Product FAQ
Your questions, answered.
Charging compatibility, onboard storage and operating conditions.
What does 209kWh mean?+
It is the onboard battery energy capacity. The 150kW figure describes peak charging power. Energy delivered to vehicles also depends on operating reserve, conversion losses and charging conditions.
Which vehicles can use this unit?+
The supplied version has one CCS2 output. Vehicle connector compatibility and charging voltage/current requirements must be checked before use.
Will every vehicle charge at 150kW?+
No. 150kW is peak output. Actual power depends on vehicle voltage and charging acceptance, the unit’s current limit, battery state of charge and temperature.
How is the mobile unit recharged?+
The brochure lists three-phase 400Vac input up to 30kW, or compatible DC input up to 105kW with a maximum voltage of 759Vdc. Confirm the input connection and supply compatibility for the project.
Does five minutes always add 100km of range?+
No. The brochure presents a charging-range example. Range gained depends on energy delivered, vehicle efficiency, battery state and charging conditions; it is not a guarantee for every vehicle.
Can it connect to a charging management platform?+
The brochure lists 4G, Wi-Fi and OCPP 1.6, with upgrade capability to OCPP 2.0.1 and OTA updates. Confirm the backend platform, payment integration and software configuration.
Product inquiry
Plan Your Mobile EV Charging Service
Tell us the destination country, vehicle types, required charging service, recharge supply and operating schedule.
G3 Mobile EV Charger with 209kWh Energy Storage
Model: G3 Category: Pv Accessories