Integrated Transformer
Built-in transformer with three-phase 220V Wye output and optional High-leg Delta connection.
50 / 100 / 150kW Three-Phase Hybrid Energy Storage Inverter
BHPS50/100/150-US-220Y(D)
Transformer-equipped hybrid inverter series for commercial solar and storage, with 220V Wye output, optional High-leg Delta connection and 400–600V battery operation.
50 / 100 / 150kWRated output220V WyeThree-phase AC≤10msAutomatic transfer
Inverter overview
Integrated Solar, Storage and Backup Power
Transformer-equipped hybrid inverter series for commercial solar and storage, with 220V Wye output, optional High-leg Delta connection and 400–600V battery operation.
The BHPS series supports programmable operating modes, remote diesel-generator control and up to four units in parallel for a maximum 600kW configuration. Automatic on-grid/off-grid transfer is specified at ≤10ms.
Parallel Expansion
Up to four units in parallel, with maximum system power of 600kW.
Flexible Energy Management
Programmable operating modes, remote generator control and touch-screen operation.
Fast Automatic Transfer
Automatic on-grid/off-grid transfer ≤10ms, with 110% overload for 10 minutes and 120% for 1 minute.
System integration
Integrated PV, Battery, Grid and Generator Architecture
Select the power rating, battery voltage and AC connection for the project.
Commercial Solar & Storage Integration
BHPS50/100/150-US-220Y(D)Coordinate PV generation, external batteries, grid, generator and loads.AC Connection
220V Wye · High-leg Delta option
Battery Voltage
400–600V
Communication
RS485 / CAN
View Inverter Scope +
- Hybrid inverter · Model selection
- BHPS50-US / BHPS100-US / BHPS150-US
- PV array · External
- PV MPPT range 480–800VDC; maximum open-circuit voltage 1000VDC.
- Battery · External
- 400–600V battery; PV MPPT voltage must be 50–200V above maximum battery voltage.
- AC installation · Project-specific
- Select Wye or optional High-leg Delta connection and apply the corresponding voltage derating.
Technical specifications
Technical Specifications
Values follow BHPS50-US / BHPS100-US / BHPS150-US order where applicable.
- Model order
- BHPS50-US / BHPS100-US / BHPS150-US
- Rated power (on-grid / off-grid)
- 50 / 100 / 150kW
- Apparent power (on-grid / off-grid)
- 50 / 100 / 150kVA
- Rated current (on-grid / off-grid)
- 131.3 / 262.7 / 394.1A
- Maximum PV power
- 55 / 110 / 165kWp
- Maximum PV input current
- 104.2 / 208.3 / 312.5A
- PV short-circuit current
- 130.2 / 260.4 / 390.6A
- Maximum battery charge / discharge power
- 50 / 100 / 150kW
- Maximum battery charge / discharge current
- 125 / 250 / 319A
- Dimensions (W × H × D)
- 950×1860×750 / 1200×1900×800 / 1200×1900×800mm
- Weight
- 590 / 923 / 1200kg
- Rated voltage
- 220V Wye
- Grid voltage range
- 190–240V
- AC connection
- 3/N/PE Wye / 3/N/PE Delta (optional)
- Rated frequency
- 50 / 60Hz
- Grid frequency range
- 45–55 / 55–65Hz
- Grid THDi
- <3%
- Power factor
- 0.8 lagging to 0.8 leading
- AC input capacity
- 50 / 100 / 150kVA
- Off-grid THDu (linear load)
- ≤2%
- Overload capability
- 110% for 10 minutes; 120% for 1 minute
- Automatic on-grid/off-grid transfer
- ≤10ms
- Maximum PV open-circuit voltage
- 1000VDC
- PV MPPT voltage range
- 480–800VDC
- Battery voltage range
- 400–600V
- Full-load battery voltage range
- 400–600V
- PV / battery voltage coordination
- PV string MPPT voltage must be 50–200V higher than maximum battery voltage.
- Voltage order
- 190 / 208 / 220 / 240V
- Wye rated AC input/output power
- 86.5% / 94.5% / 100% / 100%
- High-leg Delta rated AC input/output power
- 79.3% / 86.8% / 91.8% / 100%
- Connection options
- 190–240V Wye; optional 190–240V High-leg Delta with split phase.
- Protection degree
- Type 1
- Noise emission
- <65dB(A) at 1m
- Operating temperature
- -25 to +55°C
- Cooling
- Forced-air
- Relative humidity
- 0–95%, non-condensing
- Maximum altitude
- 6000m; derating above 3000m
- Built-in transformer
- Yes
- Surge protection
- Type II
- Standby consumption
- <30W
- Display
- Touch screen
- Communication
- RS485 / CAN
- Standards listed in datasheet
- UL1741, CSA-C22.2
Product resources
Inverter Datasheet
Download the original English datasheet for all three BHPS models, including voltage derating and connection options.
Product FAQ
Your questions, answered.
Battery compatibility, solar input and backup operation.
Which models are covered?+
BHPS50-US, BHPS100-US and BHPS150-US provide 50kW, 100kW and 150kW rated output. The series designation is BHPS50/100/150-US-220Y(D).
Which AC connections are supported?+
The rated output is 220V Wye. The datasheet also lists optional 190–240V High-leg Delta with split phase. Output derating depends on the selected voltage and connection.
What battery and PV voltages are required?+
The battery and full-load battery range is 400–600V. PV MPPT range is 480–800VDC and maximum open-circuit voltage is 1000VDC. PV string MPPT voltage must be 50–200V above maximum battery voltage.
Can multiple units work in parallel?+
The catalog specifies up to four parallel units and maximum power of 600kW.
Does the inverter include a transformer?+
Yes. All three models include a transformer, touchscreen and RS485/CAN communication. Automatic on-grid/off-grid transfer is specified at ≤10ms.
Product inquiry
Select Your Hybrid Inverter
Tell us your PV capacity, battery voltage, grid connection and backup loads.
50 / 100 / 150kW Three-Phase Hybrid Energy Storage Inverter
Model: BHPS50/100/150-US-220Y(D) Category: Solar Inverter